Ask the Pool
Guru
Question:
I'm thinking of building a pool; about how long should it
take?
Answer: A realistic estimate to build an in-
ground, gunite pool is about four months. There's a lot more to
the job than digging a hole and pouring concrete.
The process where you meet with your builder and decide on the
design, shape, size, deck, and other details takes a week or
more. Then, the plans go to an engineer, often with some give and
take between that professional, the builder, and you (the
customer). Add at least a week.
Next step is the permitting process. This can take anywhere from
two weeks to over a month. Factors include approvals of plans,
changes made, and how long the particular municipality takes to
complete their process. So you can figure on around two months
before actual construction begins.
Once the construction begins, the actual work may take around a
month. But, almost inevitably, it will be longer. There is the
weather to contend with, and rain will make certain parts of the
job impossible to complete in a timely manner.
Approvals must be received from the building department
throughout the construction process. If one inspector cannot show
up, or worse, fails to approve part of a job, other work often
has to stop until the approval is granted.
There is a twenty-eight day wait period after pouring the gunite
for it to cure before adding Diamond Brite or any other exposed
aggregate surface. Then of course, the pool has to be filled, and
the water chemically treated to protect the new surface and
create a safe swimming environment.
Plan for about a four-month job. Certain steps could shorten the
process, but delays could lengthen it. Using pre-fabricated pool
shell, such as fiberglass, vinyl, or composite could considerably
shorten the process. However, there are offsets, including design
flexibility and durability of color.
Question:
Many people asked us for further information on pets in the
pool, so we obtained some, and are pleased to present it here.
Answer: Many people allow their pets, usually
dogs, to swim in their pool. While there is nothing that would
make you forbid such activities, there are some facts and
cautions that you should be aware of.
Having a dog swim regularly in your pool is the effective
equivalent of having about seven extra people swimming. It
uses up chemicals, and increases wear and tear on your filter.
That usage is called "bather load" and it directly affects how
long your filter and other maintenance problems last. Also, you
may find some of your guests a little squeamish about swimming
with, or after, your pets.
What about the effect of treated pool water on your pets? We
asked Boca Raton Veterinarian Dr. John B. Rowell, about that. He
explained that most of the water-related problems he has seen
concern dog's ears. Because a dog's ear is furry, it naturally
stays damp a lot longer than a human ear. In turn, the moisture
may promote bacteria and yeast growth. On occasion, the end
result is the canine version of "swimmers ear". There are a lot
medications available from your vet to aid in the prevention of
such problems.
Also, untrained pets may have trouble getting out of the pool, so
they should be taught to use the stairs to prevent accidental
drowning.
The bottom line: enjoy your pool with your pets. But, please
understand that it might make your maintenance costs a little
higher for both your pool and your pet.
Question:
I see chlorine tablets at some stores; why don't you use
chlorine tablets in my pool?
Answer: In some cases, we do use chlorine tablets
in private pools. Sometimes we use only liquid chlorine, or a
combination of both types. Each method has pro's and
con's.
Liquid chlorine has the advantage of dispersing evenly in the
pool and being effective immediately. It also gives the pool
a immediate and mild "shock", which is a necessary component of a
healthy pool environment. However, it is heavier and more
difficult to transport liquids, which can, of course,
spill.
Tablets are an effective way of introducing chlorine to a
pool on a steady, continuous basis. The tablet dissolves at
a preset rate, determined by the pool technician. Tablets are
lighter, and are safer and easier to transport. However, they do
have some drawbacks. They require a "feeder" to hold the tablets
and dispense the chlorine. A feeder should be professionally
installed in the proper location. Why? Because concentrations of
chlorine that are too high could damage heaters and other
equipment. Therefore, the feeder needs to be located "downstream"
from the equipment. Some people do not like the type of dispenser
that floats in the pool because children might play with it,
causing skin irritation. Tablets in a feeder are released at a
set rate - rain or shine, hot or cold, regardless of water level.
That's good, but different conditions require different chlorine
levels, which our pool technician's will adjust with the liquid
chlorine.
Question:
Why do pool's need to be resurfaced? What will you use to
resurface my pool, Diamond Brite? When should a pool be
resurfaced?
Answer: There are two reasons. First, and most
importantly the plaster surface of your pool provides a
waterproof barrier for the six inch, thick, steel reinforced,
"Gunite" concrete that forms the solid structure which is your
pool. Gunite is not waterproof; water can penetrate it, which can
then rust the steel reinforcing bars. That can damage the actual
structural integrity of the pool. Second, the light colored
background of the surface reflects the sun's rays and allows you
to enjoy the appearance of clear blue water.
There are several "exposed aggregate" pool plasters available.
Diamond Brite is the trademark name of one of the most popular of
those finishes. Some of the other, similar brands are Marquis,
Sunstone, and Pebble-tech. UniServ offers several of the most
popular brands. All these came along in effort to replace the old
"Marcite" finishes in the pools. Marcite was originally an
effective product, but contained asbestos. When it was discovered
that asbestos was unsafe, Marcite was made without it and its
useful life dropped to between 5-8 years. In reaction, the
industry came up with the aforementioned "exposed aggregate"
finishes containing cement, man-made gems, and quarts crystal
(one of the hardest minerals in the world). These new finishes
should last 12-20 years, if the pool chemistry is properly
maintained.
Resurfacing a pool can either be a cosmetic or a structural
decision. A cosmetic job is done because your pool looks dull,
dingy, or stained. The surface may also be too rough, which hurts
hands and feet and provides a growing place for algae. You want
your pool to look and feel better. A structural reason to
resurface happens when the old plaster finish wears away. It was
only 3/8" thick when new and a little wears away each year. This
is evidenced by the appearance of gray splotches, which is the
gunite shell showing through. Again, water penetration can
cause structural damage to the pool shell, which costs 5-8 times
as much as a resurfacing job to repair.
Question:
I'm thinking of adding a heater to my pool; what should I know
about solar heat?
Answer: On balance, solar powered pool heaters are
not usually the best choice for most pool owners. However, any
properly sized heating system can dramatically increase the
length
of your swim season, and solar energy is one of several
alternative
systems available to heat your pool.
There are serious drawbacks to using solar heat. It
relies
on sunny weather, two to three cloudy days in a row would require
four to six days of pool temperature recovery. Some solar users
claim that their pools never get as warm as they desire. Of
course,
solar power would not work for a spa, as the temperature would
not
be high enough.
Solar collectors are only useful in locations where they can be
in
the sun most of the day. Collectors are usually mounted on the
roof,
but they can be mounted on a ground rack. The necessary square
footage of solar collectors installed usually approximates the
square footage of the pool surface area. Given community
association restrictions and backyard space limitations, the
homes
that can use solar power are further restricted.
Solar heating has some advantages. The initial cost of a solar
system is usually comparable to that of an electric heat pump.
However, since a solar system uses the sun's free energy, there
is
no cost of operation. Also, a properly installed, quality solar
pool
heating system requires less service and inspections and will
provide free solar heat for 15-20 years. Solar pool heating
is
environmentally friendly. It is a clean, renewable energy
source, which uses no fossil fuels or chemical refrigerants that
contribute to pollution. Gas heaters directly add some pollutants
into the air and heat pumps pollute indirectly during the
production
of the electricity they require.
Question:
How often is your filter cartridge supposed to be cleaned?
Answer: As a general rule the filter cartridge is
cleaned once a month. Unless there is a situation that requires
more
frequent cleaning. The reason that we service the filter once a
month, is that we need the filter to load a bit to catch the very
fine particles and polish up the water. If the filter can not
maintain correct flow on that schedule , and the water is blue
and
clear, It may be a filter cartridge that needs to be
replaced.
Question:
I have stains on my pool surface, what's going on?
Answer: This is a question we hear a lot. Stains
on
pool surfaces are an unfortunate and common occurrence. The
causes
and remedies vary greatly. Brownish spots may be fertilizer
stains
from any one of a variety of brands and types. An orange tint to
the stain could indicate rust. Black, yellow, and green stains
often
indicate different types of algae. Grey areas in an older pool
may
not be a stain at all, but the gunite (pool structure) showing
through the surface, indicating, the need for
resurfacing.
The treatment of stains depends on their origin. Organic stains
are
from leaves, algae, and other natural sources. They will usually
respond to normal cleaning methods, often over a period of time.
Inorganic stains, like the marks left behind by metal objects,
are
more difficult to remove and may require an acid wash. That
remedy
involves emptying the pool and is a more expensive process.
Usually,
your pool technician can identify the problem and solution.
Occasionally, a repair specialist will have to examine the
situation.
Question:
We have had heavy rain for 5 days and my pool pump has
turned off- is this normal, or do I need to have it
looked at?
Answer: The pool pump may have stopped
working for a few different reasons. The rain may have
caused the power breaker to trip in a protection type
action. It is also possible that the time clock has
stopped operating and is not applying power to the pump.
There is also the possibility that the motor may have
been nearing the end of its service life, and the rain
was enough to finish it off.
Either way a pool or spa requires circulation to stay
clean and sanitary, so this will need to be looked at
fairly quickly. If left with out circulation the pool
will start to spiral out of control.
Question:
I have a pool and a spa, which is not connected to my
pool. How often should I change their water?
Answer: This is actually two separate
questions. Pools, large and small, often go for years
without changing the water. Some procedures, such as
resurfacing and acid-washes require a pool to be drained
and refilled. However, after several years, pool water
that has not been changed for any repair, accumulates and
builds up chemicals.
The amount of outside elements in water is measured as
Total Dissolved Solids (TDS). When these get too high,
chemicals may become "locked" and unable to do their
jobs. As a result, water becomes unsanitary and algae
may form. When this happens there is no choice but to
replace the water.
Spas represent a much different situation. Compared to a
pool, a typical spa or hot tub has only 5% of the amount
of water. That makes the spa's water chemistry more
difficult to maintain, as even a small addition of the
wrong chemical can throw the balance off.
The good news is that a hot tub or spa refills quickly
and inexpensively, and the water can be rebalanced in a
relatively short amount of time. For the average
residential spa, many professionals recommend replacing
the water every two to three months. The frequency
depends largely on spa use (bather load). As an example,
busy commercial spas often change the water twice a week,
or even more. To ensure a safe sanitary spa, we test the
chemistry each week and keep an eye on the filter and
equipment.
Question:
How can I prevent ants from ending up in my pool?
Answer: There does not seem to be much
information on WHY ants occasionally end up in pools, so
perhaps the better question is: how do we prevent it?
Spray pesticides can be effective in creating a barrier
around a pool area. However, it's important to not spray
too close to a pool, for safety reasons. A better answer
might be a granular bait. Although no treatment is
absolutely 100% effective, the goal here would be the
ants taking the bait back to the nest and so eliminating
the whole colony. This is a common treatment, and the
amount laid down and its placement can be controlled.
The drawback is that such treatments often take a few
weeks to work.
UniServ can provide this treatment at a reasonable price,
Just give us a call or send us an email and we'll be
happy to look at the problem and provide a no cost, no
obligation estimate. Treatment can be done
immediately.
Question:
How can I tell if I have algae in my pool? If I do,
then what
should be done?
Answer: Algae
are single-cell plants containing chlorophyll and there
are over
30,000 varieties widespread over the planet. In a pool,
it discolors
water and pool surfaces, usually to a GREEN, yellow, or
black color.
Algae is more prevalent in warm
weather.
First, warm water provides a better medium than cooler
water for algae
bloom (growth). Also, spring and summer bring increased
sunlight and
air temperatures, as well as heavier rain. Those are
factors that
cause chlorine and other chemicals to be diluted and used
up more
quickly in the pool. One of the chlorine's main
functions in your
pool is
to act as an algae-killer. or algaecide. Inadequate
water circulation
due to a dirty filter or mechanical problem is another
cause of algae
in the pool.
What can be done to eliminate and
prevent
algae? For prevention, we make sure that the algaecide we
are using
(usually chlorine) is of sufficient concentration in the
water.
UniServ
adds a chemical referred to as stabilizer to help
maintain the proper
chlorine content. In a case where the algae has become
prevalent, the
pool will need to be chemically shocked. The procedure
will
introduce a strong mix of chemicals that will usually
eliminate the
problem. The algae will then die, and end up at the
bottom of the
pool, ready to be brushed off and vacuumed away into your
filter. The
filter will then be cleaned to ensure the algae, dead or
alive, are
not recirculated.
Question:
My pool is blue and clear, but I was told its not
"balanced". How
important is this?
Answer: A
balanced pool is extremely important and is needed to
make sure your
pool is safe and running efficiently. Not only will your
pool always
stay and look clean but it also helps the longevity of
your pool
equipment and finish.
Your pool water is constantly changing, year round.
Everything from
weather to oils, dirt, bather load, and cosmetics affect
your pool
water balance - in short, anything that comes in contact
with your pool
water.
You will probably not change the water in your pool for
many years.
Continuous filtration and disinfection removes
contaminants which keep
the water enjoyable but this is does not balance your
water. A pool
that is "balanced" has proper levels of Chlorine,
pH,
stabilizer, Calcium Hardness, phosphates, TDS, salinity,
and
Alkalinity.
Read more about Pool Water
Balancing...
Question:
I adder liquid chlorine to a stand alone spa and it
turned greenish
yellow; Why did it do this and how can I fix it?
Answer: There
could be many reasons that you are seeing this. It could
be as simple
as the color from chlorine causing this , to some sort of
reaction with
the water or chemicals.
In a Spa, chlorine is not
the chemical
that should be used for sanitation. Bromine is much
better suited to
sanitize in a spa and will not harm spa components like
chlorine will.
If you would like we could check this out and let you
know what
is going on. At this stage a water change may be needed.
Question:
Can sweat turn a pool green?
Answer: All
organic substances can help to turn a pool green. Those
include plant
parts, dog and human hair, sweat, and many others. The
human
substances could cause the chlorine to be used up and
therefore allow
algae to grow in the pool, turning it green or yellow.
The amount of
people using a pool is referred to as "bather load".
Unless it's a
large amount of bathers, this usually does not affect the
pool
chemistry. If the bather load is heavy with people, you
may want to
adjust the pool chemistry accordingly and possibly
lengthen the hours
the
pump is running daily.
A professional from
UniServ would be
able to take care of any problems of this nature and
advise you of any
necessary actions. Please call us at 954-772-9500 for
information
on our economical, high quality services.
Question:
What is in Chlorine?
Answer: Liquid
Chlorine is the most standard type of water disinfectant
used in The
United States. Liquid Chlorine other know as sodium
hypochlorite is
either added directly to the water to shock or bring the
water
chemistry back to correct parameters. Sodium Hypochlorite
has the
shortest shelf life of sanitizers when chlorine is in the
liquid
state. Liquid
chlorine is typically 11-15% and can degrade down to 8%
over 30 days
and even more in sunlight and heat. Most often it is
stored in
reservoirs temporarily where it is pumped out
automatically using a
chemical feed pump out to the body of water. Liquid
chlorine or Sodium
Hypochlorite is the most common disinfectant in
commercial pool
applications.
Tablet chlorine also
known as Trichlor
or chlorine Tabs. proper name being Trichloro-s-
triazinetrione. Trichlor is widely used in residential
applications as
the chlorine
tabs contain muriatic acid and cyanuric acid. With the
combination of
the three the water chemistry stays somewhat balanced in
a normal
residential setting. Tablet chlorine is difficult to
monitor and use
on heavier used pools or commercial applications as a
stand alone
chlorine feeder. Read More...
Question: My
pool is turning green often, i already checked the
cianuric acid and
phosphates and its good. Do you think that could be
anything
related with saturation index and dual main drain?
Answer: Green
pools can be caused by a variety of factors, but you're
correct in
worrying about chlorine and stabilizer first. Other
obvious problem-
causers include daily circulation times (should be at
least 6 – 8
hours this time of year) and if you are adding water due
to a leak.
The saturation index you
ask about can
affect algae growth. However, we often associate those
imbalances in
pH, alkalinity, and calcium with the life of your pool
surface and
equipment, as well as swimmer comfort.
The dual main drains
question is a
something where we could not comment without having a
professional
actually look at the pool. Of course, our company is
state
licensed
and we have experts on staff that can analyze problems,
service pools,
and replace or repair equipment when needed.
Also, most pool supply
stores will
analyze your water for free. Keep in mind that this also
is in the
interest of selling you chemicals, and that treating the
symptoms is
not
necessarily treating the problem.
Good luck, and feel free
to contact us for
any needed
services.
Question: What should I do to my
pool if it looks
like we're going to get hit by a hurricane?
Answer: If a hurricane arrives, pool
care is a two-
part process: before and after the storm. You should not
expect full
service right before a storm, so you may wish to take the
following
actions:
Before The Storm:
- Do not empty your
pool, or
if you really must, lower it only a few inches.
- Turn off electricity
to pool
equipment.
- Protect electric
equipment:
heaters, motors, clocks, etc. with tied-down water proof
covers.
- Remove loose items
from the pool
area; placing them in the pool can cause damage and
staining.
- Protect screen
enclosures by
removing opposite side-panels, allowing a wind vent.
- Add a shock dose of
chlorine to
the pool, if possible.
After The Storm
- It is not necessary
to lower the
water level down to the skimmer; most pools are built to
handle
overflow runoff. In a few rare cases, where a home may
be flooded by
overflow, you may wish to drain a few inches.
- Remove debris by
hand, rake, or
net as the vacuum system may be clogged.
- Make sure electrical
equipment is
dry before restarting your system.
- Clean the filter and
run the
system continuously until the water is clear; then reset
the timer.
We also suggest that you do not
swim after a
heavy rainstorm or hurricane until you or your pool
technician has
checked and rebalanced your pool.
Question: What should I do, now that
the rainy
season is here?
Answer: South Florida rains bring two
major
problems: flooding and lightning. At times, the rain is
heavy enough
to
cause overflow in a pool. Almost all pools are designed
and built so
that overflow will not harm surrounding areas, your pool
equipment, or
enter your home or nearby structures. Therefore, you
usually
do not have to worry about a pool overflowing its natural
boundaries;
just let it go.
The alternative to allowing a
pool to overflow
is to partially drain it by turning a waste/drain valve.
This is less
desirable for several reasons. The water you release is
more
chemically treated than that which is on the surface and
would
overflow naturally. Pumping the chemically treated water
into
landscaping is harmful to plants, dilutes your
sanitizers, encourages
algae
bloom, and is more expensive to replace.
In rare instances, pools are
very close to
home and have a history of causing damaging floods.
Certainly in those
cases, lowering the pool level is the right thing to
do. An
automatic pool drain empties into an underground dry well
to prevent
property damage. If you don't have one and desire an
estimate for
such work, call us.
After a heavy rain, expect the
appearance of
your pool to suffer. Unscreened pools will receive an
invasion of
large and small debris. Screened pools will get silt and
dirt from
the
screens that will mostly settle at the bottom of the
pool. If you are
unhappy with your pool's appearance between service
visits, an
automatic pool cleaner will take care of a lot of the
dirt and may
reduce
your weekly service cost. Twice weekly service is also
available for
a modest increase over regular service. Call us for a
price quote.
While minor flooding is an
inconvenience,
lighting here is a very serious matter. Respect the
lightning.
Florida is the lighting capital of the United States,
accounting for
about 10% of the lighting-related deaths nation wide.
Between 1959
and 1994 florida sustained 1,523 lighting casualties,
compared with
732 for the next highest state, Michigan.
Simple pool/lighting hints are:
stay away from
metal handrails and ladders and, of course, do not swim.
Keep in mind
that our pool technicians do not ordinarily use poles (to
do a
thorough cleaning) with lightning in the vicinity. In
any rain, avoid
the timer equipment. It contains potentially unshielded,
dangerous
voltage; not a healthy combination with standing water or
wet hands.
Question: Is there something that
would help get
rid of sweat bees that are always around our pool?
Answer: Sweat Bees is a term that
usually refers to
small bees with an almost painless sting. Those bees are
attracted
to flowers and plants. They also actually do like
sweat (salt), and
will land on people to get it. The bees most often nest
in the
ground, so usually there is no single nest on a wall or
in the eaves
to
destroy. They are generally considered a beneficial
species, so
killing them is not an automatic response. However, they
can become a
nuisance in larger numbers.
Keeping your pool area free of
flowering
plants may help. An extensive pesticide lawn spray could
also help,
but less so if the bees are coming from neighboring
properties. If
you
need a professional, UniServ's licensed pest control
personnel know
about bees and can provide advice, price estimates, and
solutions.
Question: I have a hot tub that
foams like crazy.
Is that a problem? If it is, what should I do?
Answer: A well-tuned hot tub or spa
with properly
treated water, creates bubbles in ways that looks and
feel great.
However, when you see excessive foam everywhere, it can
indicate that
water chemistry or pollutants are out of control.
There are a variety of possible
causes of
excessive foaming. You may have added an inappropriate
element to the
hot tub, such as certain algaecides or soaps. Source
water that is
too soft could cause the problem. An improperly
functioning ozonator
can cause trouble. Airborne pollutants can increase
solids in the
water and create that foam.
You should remember that a spa or
hot tub is a
much smaller body of water than a pool. Therefore, the
results of
mistakes in chemistry are often greatly magnified in
comparison.
Those effects and results range from scum rings around
the tub to
filter damage to unsanitary water.
What can you do? Attack the
cause of the
problem. Defoamers do only what they say: cut back the
foam. Use
products with enzymes that will neutralize and actually
convert the
compounds that cause the problems. Also, stop using the
types of
algaecides and tile soaps that cause the problem.
Question: I
have a pool, and a spa which is not connected to my pool.
How often
should I change their water?
Answer: This is actually two separate
questions.
Pools, large and small, often go for years without
changing their
water. Some procedures, such as resurfacing and acid-
washes require a
pool to be drained and refilled. However, after several
years, pool
water that not been changed for any repair, accumulates
and builds
up chemicals.
The amount of outside elements in
water is
measured as Total Dissolved Solids (TDS). When these get
too high,
chemicals may become "locked" and unable to do their
jobs. As a
result,
water becomes unsanitary and algae may form. When this
happens there
is no choice but to replace the water.
Spas represent a much different
situation.
Compared to a pool, a typical spa or hot tub has only 5%
of the amount
of water. That makes the spa's water chemistry more
difficult to
maintain, as even a small addition of the wrong chemical
can throw off
the balance.
The good news is that a hot tub
or spa refills
quickly and inexpensively, and the water can be
rebalanced in a
relatively short amount of time. For the average
residential spa,
many
professionals recommend replacing the water every two to
three months.
That frequency depends largely on spa use. As an
example, busy
commercial spas often change the water twice a week, or
even more. To
ensure a safe and sanitary spa, we test the chemistry
each week and
keep an eye on the filters and equipment.
Question:
What should I know about my timer box?
Answer: Your
timer is a key part of your pool filtration system and an
important
energy management tool. It turns your filtration system
on and off,
which makes sure that the water is circulated properly.
Such
circulation ensures that your pool water remains healthy,
clear, and
in compliance with local residential codes. For most
pools, the
system
should be on for 6 to 8 hours a day.
The timer is in a waterproof box
mounted on
the wall of your house nearest the pool pump. You can
recognize the
timer box by the waterproof electrical conduit coming out
of it. The
box has a latch on the right side and it should be kept
closed to
prevent water damage and insect intrusion.
Because your timer operates off
the same
electricity as your home, a power interruption in your
home will knock
the timer out as well. Just as the clocks in your home,
you may wish
to reset the pool timer, which is relatively easy.
Please note that
this is a 24 hour clock, so be careful that AM and PM are
used
correctly.
Question:
The main grate at the bottom of my pool is loose, and
I've heard
that this is dangerous; is it?
Answer: Yes!
Any man drain cover that is loose, damaged, or missing
creates a
potentially life-threatening situation. Skin limbs, or
hair can
become
stuck to the drain in a scary situation known as "suction
entrapment."
When that happens to an adult or child, even several
strong people
may be unable to free the trapped individual. The
unfortunate
results can be drowning, near drowning, or even
disembowelment.
According to officials at the
U.S. Consumer
Product Safety Commission, drowning and injury statistics
regarding
suction entrapment have been under-reported for years.
It is thought
that many deaths reported simply as "drowning", were
actually caused
by entrapment.
What can be done to avoid injury
at your pool?
From a distance of several feet, at least, look at the
main drain
located in the bottom of your pool. If the drain cover
is loose,
missing, or cracked, immediately call UniServ for repair
or
replacement of the cover and make sure that no swimmers
go anywhere
near the drain until it is repaired and safe.
Question: My
pool tech shows up and does a nice job cleaning my pool.
Three days
later, there are leaves and other debris on the bottom
again; what
can I do?
Answer:
Unfortunately, no matter how good your pool technician
is, sometimes a
pool will get littered soon after a service. The reasons
vary.
Perhaps
the weather is extremely windy, causing debris to below
into the pool.
In other cases, landscapers do their work the day after
the pool
service, leaving grass cuttings and other matter in the
pool or loose
on the deck.
Another cause of a dirty pool is
improper flow
of water. Remember, the circulatory system of your pool
is critical
to clean, healthy water. Different items can affect that
flow,
including filter problems, pump problems, and improper
water levels
(both too high and too low).
Question:
How long should I run my pump motor each day?
Answer: The
pump motor circulates the water in your pool, sending it
through the
filtration system, thereby removing dirt and other
impurities.
Industry standards suggest that the water be "turned
over" a minimum of
two times per day in order to keep your pool clean and
bacteria free.
In many cases as a result of bather load and
environmental
factors, pools should be turned over more than two times
a day.
Maintaining that clean and
healthy pool
necessitates running the pool pump motor for
approximately eight hours
per day in the summer months (April - October) and
approximately six
hours per day during the winter (November - March).
Those with pool
heaters should run your pool pump motors eight or more
hours per day
while your heating system is activated, in order to
maintain a
consistent water temperature.
|
Ask the Pool
GuruComplete the
form below to ask the pool guru your questions about
maintenance and
repair.
|
